Often asked: How To Build A Simple Picnic Table?

How much does it cost to build a picnic table?

Enough about the tools, lets go get some materials! At the time of this build (March 2013) the materials cost is just under $100 at my local Lowes. That is the cost of building it out of untreated wood and sealing it yourself.

What you need to build a picnic table?

All you‘ll need is a saw, drill, screwdriver, wrench, and lumber. This 14-page picnic table plan will provide you with a materials list, written instructions, and lots of diagrams.

How much wood do I need to build a picnic table?

Purchase durable lumber for the project.



To make an average-sized table, buy: 15 boards that are 2 × 6 × 72 in (5.1 × 15.2 × 182.9 cm). 7 boards that are 2 × 4 × 30 in (5.1 × 10.2 × 76.2 cm)

What kind of wood should I use to build a picnic table?

Softwood species like Cedar, Redwood and Douglas fir are all good options that are both weather-resistant and available at most lumber yards. These are the best woods for picnic tables because they are lightweight and extremely tough.

Should I use treated lumber for picnic table?

Pressure treated wood has become a common material in the construction industry recently but is pressure treated wood safe for picnic tables? YES, it is safe. The most commonly used chemicals in the pressure treatment of wood today contain non-toxic substances making it safe for use on picnic tables.

What angle do I cut picnic table legs?

Draw a 60-degree angle at each end of the legs using a pencil and combination square, then cut with a circular saw. Mark a point 1 1/2” from the outside edge of the bottom of each leg with a combination square, then mark a point 1 1/2” from the outside edge of the bottom of each leg. Cut the corner.

What size is a picnic table?

Rectangular picnic tables are commonly dimensioned at 72” (183 cm) in length, 58.75” (149 cm) in width, an overall table height of 30.5” (78 cm), and a bench height at 17” (43 cm). Picnic tables are outdoor tables with included benches.

How do you make an 8 foot picnic table?

8 foot Picnic Table Plans

1. A – 4 pieces of 2×6 lumber – 36″ long LEGS.
2. B – 2 pieces of 2×6 lumber – 60″ long BRACES.
3. C – 3 pieces of 2×4 lumber – 28 1/2″ long SUPPORT.
4. D – 2 pieces of 2×6 lumber – 85″ long SEAT SUPPORT.
5. E – 4 pieces of 2×6 lumber – 96″ long SEAT BEAMS.
6. F – 5 pieces of 2×6 lumber – 96″ long TABLETOP.

How do you make a kid picnic table?

Assembly Instructions

1. Start by cutting the legs (A). Cut four 2×4 boards to 1′ 11″.
2. Cut two 2×6 boards to 4′ for the seat (D). Assemble the seat as show in the drawing above.
3. Cut five 2×6 boards to 4′ for the table top (E). Assemble as shown in drawing above.
4. Cut two 2×4 boards for the center brace (F) to 1′ 8″.

Does Home Depot sell picnic tables?

Picnic Tables – Patio Tables – The Home Depot.

How do you make a picnic table with different benches?

Picnic Table With Detached Benches

1. Step 1: Table Dimensions and Design. This particular table is very sturdy and probably a bit overbuilt.
2. Step 3: Lay It All Out.
3. Step 4: Create the Legs.
4. Step 5: Create the Leg Cradle.
5. Step 6: Attach Legs to Benches.
6. Step 7: Lay Out the Table Top.
7. Step 9: Wrapping It Up.

What kind of wood should I use for an outdoor table top?

What are the best types of timber for garden furniture?

• Teak. Everybody knows about teak, possibly the ideal wood for outdoor furniture.
• European Oak. There’s a reason why oak is a perennially-popular choice for the woodworkers, particularly those involved in outdoor projects.
• Western Red Cedar / Siberian Larch.
• Iroko.

Is Pine good for picnic table?

Pine and Other Softwoods as a Material for Picnic Tables



A popular choice for building picnic tables is pine or other softwoods. Softwoods are abundant and inexpensive, but they’re not great choices for an outdoor picnic table — they don’t tend to weather very well and don’t resist spills.

What angle should table legs be?

The length of your leg is determined by first deciding what angle you want your leg to be cut at. If you use a 14 degree angle like most sawhorses that is the equivalent of a 12/4 pitch. This means that for every 12 inches of height you want your leg to have, it will kick out 4 inches.