FAQ: How To Build A Kegerator From A Freezer?

Can you make a Kegerator out of a chest freezer?

Commercial keg coolers with tap systems get pricey pretty quickly so I decided to convert an old chest freezer (donated from a friend) into a kegerator, otherwise known as a Keezer. These are perfect for home brewers and beer enthusiasts.

What size chest freezer do I need for a Kegerator?

4 kegs is a minimum of 7cu ft chest freezer. Usually holds 4-5 kegs with some wiggle room with 8″ collar (depending on shape of compressor hump). If you want a short collar then you’re limited to 3-4 full size kegs.. If you want to keep your CO2 inside, that’s going to take a keg spot.

Is it cheaper to buy or build a Kegerator?

You may think buying is cheaper, but if you have some of the supplies at home or available at a lower cost, you can build an amazing kegerator for cheaper than most store-bought brands. Kegerators are relatively simple machines that do not require too much of the expensive equipment, unless you want that of course.

You might be interested:  Readers ask: How Much To Build Screened In Porch?

Can you put beer keg in freezer?

Fortunately, there’s a way to speed things up! Wet a little bit of kitchen roll or toilet paper, wrap your beer in it and place it in the freezer. After 10 minutes your beer will be cold!

How warm can a chest freezer get?

Your freezer, whether it’s a fridge/freezer combo, chest style, or standup, should maintain a temperature of 0 degrees Fahrenheit or colder (-18 degrees Celsius). While it is true that food freezes at 32 degrees Fahrenheit, for safety and long-term storage, barely frozen isn’t good enough.

Can I use a chest freezer as a refrigerator?

Your converted freezer can be used as a regular refrigerator. It’s not the same as one that you buy from the shop because it still has the freezer coils and other physical limitations inside.

How do you make beer in a Kegerator?

Here are our step-by-step plans for building the most basic draft system.

  1. Step 1: Choose Your Refrigerator.
  2. Step 2: Choose Your Kegerator Conversion Kit.
  3. Step 3: Disassemble the Fridge.
  4. Step 4: Remove the Plastic Top Piece.
  5. Step 5: Find the Cooling Lines.
  6. Step 6: Drill a Hole in the Fridge.
  7. Step 7: Prepare the Lid.

How many corny kegs fit in a 7 cubic foot freezer?

I have two 7 cu ft freezers. One easily holds 4 kegs. The other (which I use as a fermentation chamber & holds 2 buckets or carboys) isn’t really big enough for 4 kegs.

How many kegs fit in a keezer?

Insignia 7.1cuft keezer. Holds 4 kegs, 4 taps, and a co2 tank.

What size chest freezer do I need?

The rule of thumb to plan for is 1.5 cubic feet of freezer space per person in your family. Thus a family of 4 should get at least an 6 cubic foot freezer. Choose a freezer that’s not too big and not too small but just right. For the best energy efficiency your freezer should always be 2/3s full or more.

You might be interested:  How To Build A Boat Hull?

Is it worth getting a Kegerator?

A kegerator provides over $55 in savings per keg! Plus, you can get the bar experience at home for much less than heading out! Again, we can’t emphasize enough how different draft beer taste from a can or bottle. It will greatly increase your beer experience!

Do you leave the CO2 on in a Kegerator?

The beer will stay carbonated and will be ready when you need it. (During serving, it’s a good idea to keep the CO2 connected if much of the keg will be consumed, so the dispensing pressure is maintained.)

What to know before buying a Kegerator?

In order to have access to a wide selection of beers, you will need a dispenser that is capable of fitting at least a sixth or quarter barrel keg. Most kegerators will be able to easily fit this size keg, with many units able to fit two or three, allowing you to keep multiple beers on tap at all times.

Leave a Reply

Your email address will not be published. Required fields are marked *